Boards Index General discussion Technical Q&A windows memory?

Viewing 10 posts - 31 through 40 (of 60 total)
  • Author
    Posts
  • #106468

    @superanubistype wrote:

    Owen i take it as you did’nt know that XP makes the default setting of the paging file is 1 and 1/2 times the physical RAM installed on the comp and this would make the default paging file exactly 376 mb on Ellens machine with 256mb of physical RAM instaled.
    If you dont believe me Google it like you normally do.

    It’s exactly 384 MB actually.
    What’s wrong with using Google?

    @superanubistype wrote:

    So now Ellen has a combined RAM of 906 mb, 256 mb of physical RAM, and a 650 mb of (VM) and heavy usage of HDD not to mention changing the settings and performance to Windows 98, and the problems still there LMAO.

    The recommended minimum size is equivalent to 1.5 times the RAM
    on your computer, and 3 times that figure for the maximum size. For
    example, if you have 256 MB of RAM, the minimum size is 384 MB, and
    the maximum size is 1152 MB.
    For best performance, do not set the initial size to less than the minimum
    recommended size under Total paging file size for all drives. The
    recommended size is equivalent to 1.5 times the RAM on your computer.
    It is good practice to leave the paging file at its recommended size.
    However, you may increase its size if you frequently use programs that
    use much memory.

    http://support.microsoft.com/kb/308417/

    I didn’t advise Ellen to increase her VM, I told her where she could find
    the recommended paging file size for her pc.
    My post regarding performance settings merely turns off the fancy
    graphics of XP. It does increase performance, it does not make XP
    perform like 98!

    @superanubistype wrote:

    Thanks Owen for proving you really dont know a thing.

    How arrogant you are!

    #106469

    @Ow£n Ka$h wrote:

    @superanubistype wrote:

    Owen i take it as you did’nt know that XP makes the default setting of the paging file is 1 and 1/2 times the physical RAM installed on the comp and this would make the default paging file exactly 376 mb on Ellens machine with 256mb of physical RAM instaled.
    If you dont believe me Google it like you normally do.

    It’s exactly 384 MB actually.
    What’s wrong with using Google?

    @superanubistype wrote:

    So now Ellen has a combined RAM of 906 mb, 256 mb of physical RAM, and a 650 mb of (VM) and heavy usage of HDD not to mention changing the settings and performance to Windows 98, and the problems still there LMAO.

    The recommended minimum size is equivalent to 1.5 times the RAM
    on your computer, and 3 times that figure for the maximum size. For
    example, if you have 256 MB of RAM, the minimum size is 384 MB, and
    the maximum size is 1152 MB.
    For best performance, do not set the initial size to less than the minimum
    recommended size under Total paging file size for all drives. The
    recommended size is equivalent to 1.5 times the RAM on your computer.
    It is good practice to leave the paging file at its recommended size.
    However, you may increase its size if you frequently use programs that
    use much memory.

    http://support.microsoft.com/kb/308417/

    I didn’t advise Ellen to increase her VM, I told her where she could find
    the recommended paging file size for her pc.
    My post regarding performance settings merely turns off the fancy
    graphics of XP. It does increase performance, it does not make XP
    perform like 98!

    @superanubistype wrote:

    Thanks Owen for proving you really dont know a thing.

    How arrogant you are!

    LMAO, sorry its not 376 its 386mb my mistake!!, but im glad you read up on that, you might of learned something. You did’nt know it was 1.5 times the RAM instaled. I did shut you up though, lmao you thought i would’nt know that.

    Owen you can increase the paging file volume to max of 1152mb as i have already stated on this topic (see last page) but i guess you dont know what effects this has on the HDD (google it) and turning off the performance settings does make it look nasty and feel like Win98.

    I can argue this with you all night but your trying to get someone to feed more VM RAM to an application on a system thats eating way too much RAM as it is, and you did’nt even stop to think what is eating at Ellens RAM.

    In laymans terms your saying fúck what ever is causing the RAM drainage just increase the paging file and turn off your perfomance and setttings to Xp, and hopefully the errors will disappear.

    BTW if you want to turn your paging file up x3 it’s highly advisable that you instal the paging file on a seperate partition on your HDD and the paging file must be kept away from the same partition your program files are instaled on , bet you did’nt know that (Google that one). Remeber when the paging file is in use a 1152mb VM is going to be constantly reading, deleting and writing 1152mb of info as quick as the transfer rate will allow, causing massive HDD usage.

    #106470

    FFS i wish i hadn’t posted this if it were gonna get really bitchy!!!!!!

    anyhow, owen has helped me a lot the problem is sorted. so THANK YOU OWEN!!!!!!

    #106471

    Owen fixed it Ellen?.

    Anyone who knows there comps would tell ya Owen has not fixed your RAM drainage, more like just hidden what ever is causing the drainage on the RAM in the first place by increasing you VM volume and getting you to turn off your graphics for XP.

    I will always point out when bad advise is given, as i would expect someone to say if i was giving out bad advice. But im trying to advise you too find out where your RAM resources are going.

    Ellen you really should find out what is causing so much drainage on your RAM.

    #106472

    I could post the smug grin emoticon right now, but I’m not like that. :lol:
    OK lets get to the bottom of the problem if Ellen doesn’t mind.
    Ellen go to this site:
    http://www.pcpitstop.com/
    Press the key symbol at the top, and on the next page press the key
    symbol again.
    Now press ‘Test Anonymously’, and on the next page press ‘Let’s go!’.
    You have to allow the site to instal a ActiveX control on your pc. It’s
    perfectly safe, and if you wish I can tell you how to remove it afterwards
    quite easily. (If you leave it on your pc you don’t need to instal it next
    time you need to run the tests). :wink:
    When the tests are completed you will see a screen similar to this,
    hopefully with no red or yellow flags.

    If you have any red or yellow flags, click on them to receive advice on
    how to remedy the problem.
    (I have a yellow flag next to ‘Memory’ because they recommend 512MB
    of RAM minimum.)
    Also on this page click on Windows details page and this will show the
    running processes on your pc.
    Don’t worry about the ones highlighted in green as they are necessary.
    Can you post a pic of the other processes running and hopefully we can
    see which program is using your RAM.

    I know this is a long winded way to see what might be causing the
    problem on Ellen’s pc, but it does no harm to take her pc to pc-pitstop.
    This site is very good at troubleshooting. 8)

    Alternately you could press:
    Ctrl Alt and Delete at the same time to open the Task Manager,
    then click Processes and post a pic of all processes here. :wink:

    #106473

    flamingg hell!!!!!!!!!!

    ready owen!!!!!!!!!!!

    memory : yellow flag.
    Disk: drive c (yellow)
    internet: msie6.0;sv1;funwebproducts;.NET CLR 1.1.4322 (yellow)
    Windows: xp sp2 (yellow)

    arrrrrrrrggggggggggghhhhhhhhhhhhhh

    #106474

    @ellen wrote:

    flamingg hell!!!!!!!!!!

    ready owen!!!!!!!!!!!

    memory : yellow flag.
    Disk: drive c (yellow)
    internet: msie6.0;sv1;funwebproducts;.NET CLR 1.1.4322 (yellow)
    Windows: xp sp2 (yellow)

    arrrrrrrrggggggggggghhhhhhhhhhhhhh

    The good news is you only got some yellow flags which represent minor
    problems. 8)
    The bad news is that you have FunWebProducts on your pc.
    http://www.nwfusion.com/newsletters/web/2003/1208web2.html

    #106475

    errrrrrrrrrrrrrrrrm so do i rid. i want rid, get rid, cant get it off ffs HELP! :? :? :? :? :?

    #106476

    avast (freeware) is `meant` to be good for removing FunWeb stuff Ellen.

    http://www.avast.com/eng/avast_4_home.html

    #106477

    LMAO, Now i will post a smug grin!. :D

    See Owen, you should’nt of instructed Ellen to increase the VM volume and turn off the performance and graphics of XP, as i said all the way along in this topic you need to hunt what is causing the problem and not hide it.

    I read this article about the adware/malware Ellen has been infected with.

    The consequences of FunWebProducts in Windows systems are serious. These programs can cause browsers to perform slowly, can degrade overall system performance, and can damage Windows configurations. They can also cause other applications to misbehave.

    Thanks for proving it once again Owen.

Viewing 10 posts - 31 through 40 (of 60 total)

Get involved in this discussion! Log in or register now to have your say!