Boards Index Fun and humour Jokes and humourous links How to change a car tyre

Viewing 10 posts - 1 through 10 (of 23 total)
  • Author
    Posts
  • #1091698

    1. Push the car to somewhere you can be seen.

    2. Stand looking dumb at the flat tyre. (tears optional )

    3 Wait for someone to change it for you. ;-)

     

    1 member liked this post.
    #1091701

    lol@push the car………you need at least 2 to push a car as you need some one to hold the steering wheel and put the brakes and clutch on etc.

    #1091708

    I will just hope the nuts are not too tight.

     

    #1091709

    lol@push the car………you need at least 2 to push a car as you need some one to hold the steering wheel and put the brakes and clutch on etc.

    Sighs well how would I know best to just stand looking dumb then.

    How do you get the steering wheel off? and why do I have to have the brake on to push it?

    I do carry a spare tyre with me wherever I go though it is around my waist.

    #1091712

    Ye don’t need two people to push a car – push from the driver’s door with a hand on the steering wheel!?  So long as you’re not 3ft tall going up a muddy track on a steep gradient with a pickup you should be fine.

    1 member liked this post.
    #1091713

    Hey I ain’t pushing no car dudes, I’d break a heel pfft.

     

    #1091715

    Ye don’t need two people to push a car – push from the driver’s door with a hand on the steering wheel!? So long as you’re not 3ft tall going up a muddy track on a steep gradient with a pickup you should be fine.

    Wow a tyre changer and a pick up at the same time ;-)

     

    I will just hope the nuts are not too tight.

    If the nuts are tight a bit of lubricating oil will loosen them.

     

    • This reply was modified 6 years, 9 months ago by  hugs and wink.
    #1091718

    FILTH

     

    #1091719

    #1091720

    Can’t get the bolts off the battery terminals in order to charge it.

    Sarah = unhappy bunny

     

Viewing 10 posts - 1 through 10 (of 23 total)

Get involved in this discussion! Log in or register now to have your say!